Preparation

Keep this guide handy to ensure everything is done quickly. You will need:

  • A USB cable that comes with the camera

    Occasionally, issues arise due to poor-quality cables. It’s best to use the one included with the camera. If unavailable, choose the highest-quality cable you have 🙂. For newer models, this will typically be USB Type-C, compatible with Android phone cables.

  • A computer:

    • Windows 10 or higher (preferred)
    • macOS Monterey, macOS Ventura, or newer

    If you don’t have access to a suitable computer, you can visit the nearest computer club.

  • A stable internet connection

  • The camera should be charged to at least 20%

  • No memory card is required

If you decide to postpone the procedure, bookmark this page ❤️ and follow our VK group.

I’m usually available from 02:00 to 15:00 GMT time and can perform the procedure immediately upon request. We can also schedule a convenient time in advance.

Procedure Steps

  1. Download the USB over Network program for remote access. Leave all checkboxes at their default settings.

  2. After installation, you may be prompted to restart your computer with a small window displaying Yes and No buttons. Click Yes.

  3. Launch the USB over Network program by double-clicking its desktop icon.

  4. Connect your camera:

    1. Turn off the camera.

    2. Connect the camera to your computer using the included USB cable.

    3. Turn on the camera.

    4. If this is your first time using the camera and you haven’t selected a language yet, do so. Follow the prompts to set the time zone and navigate through the dialogs.

    5. When prompted to choose a USB connection mode, select Mass Storage (also known as Image Transfer, MSC, or Storage Mode) and confirm with OK.

      Untitled

  5. Send me a photo of the camera screen through our chat.

    The camera screen should show that it is connected in Mass Storage mode. If you see MTP instead of Mass Storage, change the USB mode in the camera settings.

    Untitled

  6. Share the port with the camera on your computer. To do this, in the USB over Network program, locate the camera, right-click on it, and select Share Port (not Share Device).

    Share Port

  7. Connect to my computer. In the Program menu, select Connect to Client.

    img.png

    Enter desk-1.language-unlock.com in the Client IP address or computer name field and click OK.

    img.png

  8. Wait. Within about 5–7 minutes, I will inform you that the language has been unlocked. The camera may turn off and on multiple times during the process—this is normal.

  9. Turn off the camera, disconnect it from the computer, and turn it back on. Done! Your language will now appear in the language selection menu. You’re amazing!

    Screenshot from 2023-04-30 01-35-21.png

    Screenshot from 2023-04-30 01-32-14.png

How to Change USB Connection Mode

We need the connection mode to be Mass Storage (Image Transfer, MSC), but sometimes the camera defaults to a different mode, such as MTP. Follow these steps to change the mode manually:

  1. Disconnect the camera from the computer.

  2. Change the setting in the camera menu.

    Untitled

  3. Reconnect the camera to the computer and ensure the connection mode is now Mass Storage (or Image Transfer).

Payment

You can see the payment options here

Payment is made before the procedure. Unfortunately, there have been cases where clients “forgot” or stopped responding after the service. Check out the reviews. If still in doubt, feel free to contact me.

Discounts are available for businesses.

Have more questions? Check out the FAQ.